If you have an electric oven and it’s not heating up like it should (or at all) then you might have a faulty bake element. Sometimes, the bake element is visibly damaged or even falls apart altogether, so it’s easy to tell that you need a new electric oven bake element replacement part.
Replacing the bake element in an electric oven is an affordable and super easy fix. First, find the correct part for your stove by locating your appliance’s model number. Usually, it’s on a sticker inside your stove’s lower storage drawer, but not IN the drawer, but on the appliance. Here are some other places to look: http://www.everyappliancepart.com/help_finding_model_number.php
Once you have that, copy down the model number and enter it into the search box on EveryAppliancePart.com to find the right part for your appliance.
Once you have your part, unplug your appliance or shut off the power to the appliance before you make your repair.
- Disconnect and remove your old bake element by removing the screws that hold the element in place to the inside back wall of your oven.
- Gently pull the old broken element forward. You will see that there are wires running to the element which provides the electricity in order to heat the element. You may need a pair of needle nose pliers to remove these wire leads. VERY IMPORTANT – don’t let these wires disappear through the holes into the body of your oven. If you do, you will need to remove the wall oven in order to get them back, which is a lot of work.
- Attach the wires to your new bake element (these usually slide in) and then push the new bake element into place. Replace the screws and you are done.
- Connect the power back to your electric range and turn your oven on to see if it works.